In fact, tool passivation is not a literal understanding of the word, but a way to improve tool life. Improve tool quality through processes such as leveling, polishing, and deburring. This is actually a normal process before the coating is finished after the grinding. Many friends have such a question. The CNC tool used in the machining center is not as fast as possible. Why should it be passivated? In fact, tool passivation is not a literal understanding, but a way to improve tool life. Improve tool quality through processes such as leveling, polishing, and deburring. This is actually a normal process before the coating is finished after the grinding.

The tool will be sharpened by a grinding wheel before the finished product, but the sharpening will result in different levels of micro-notch. The machining center can perform high-speed cutting while the micro-notch can be easily expanded to accelerate tool wear and damage. In modern cutting technology, the stability and precision of the tool are strictly required. Therefore, the CNC tool must pass the passivation treatment before the coating to ensure the firmness and service life of the coating.

What are the benefits of tool passivation?

1. Resistance to physical wear of the tool

During the cutting process, the surface of the tool will be gradually worn out by the workpiece. During the cutting process, the cutting edge is prone to plastic deformation under high temperature and high pressure. The passivation of the tool helps the tool to increase rigidity and avoid premature loss of cutting performance.

2. Maintain the smoothness of the workpiece

A burr on the edge of the tool can cause the tool to wear and the surface of the machined workpiece can become rough. After passivation, the cutting edge of the tool will become smooth, the chipping phenomenon will be reduced, and the surface finish of the workpiece will be improved.

3. Convenient groove chip removal

Polishing the tool groove improves surface quality and chip removal performance. The flatter and smoother the groove surface, the better the chip removal, for a more consistent cutting process.

After the passivation and polishing of the CNC tool in the machining center, many small holes will be left on the surface. These holes can absorb more cutting fluid during processing, which greatly reduces the heat generated during cutting, which greatly improves the cutting process. speed.

1. Green environmental protection, safety and energy saving, saving electricity and money.
2. It is beautiful and generous to adopt the integrated design of main engine and water tank, which takes up less space and is easy to install.
3.100L-400L can be used for 2-8 people.
4. The inner/outer coil can be combined with solar water heater, and the additional solar coil can be selected.
5.1-2KW electric heating is used as backup to ensure a more stable heat supply.
6. Food grade tank liner, body elements free collocation (appearance, style optional), stainless steel, color sheet metal ,ect.
7. Material of tank shell can be chosen. Magnesium rod can be built in water tank to prevent calcification and scaling.
8. Max hot water is 60 degrees. Weekly high temperature disinfection regularly to ensure clean water quality.
9. Multiple self-protection functions.
10. Use world-famous compressors.

All In One Heat Pump

All In One Heat Pump,All In One Heat Pump Water Heater,Residential Heat Pump Water Heater,Eco Heat Pump

Guangdong Shunde O.S.B. Environmental Technology CO.,LTD. , https://www.heatpump-osb.com