Model NO.: Spray dryer
Material: SUS304/SUS316/Q235
Usage: Acacia Gum, Brewery Yeast, Pig Blood, Milk etc
Trademark: Lemar
Specification: LPG (5-6000)
Origin: China
HS Code: 8419399090


LPG High Speed Centrifugal Spray Drying Equipment for Producing Powder

I. Description of LPG spray dryer:
  
LPG Centrifugal spray dryer is the widest used technology in the liquid shaping technology and in the drying industry. It is most suitable for producing powder, particle, or block solid products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, when the particle size and distribution of the final products, their residual water contents, the stocking density and the particle shape meet the precision standards, the spray drying is one of the most desired technologies.


II. Features of LPG spray dryer:
1. High speed of drying. After the spraying of he material liquid, the surface area of the material will be increased greatly. In the hot-air flow, 95%-98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds.
2. It is especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, mobility, dissolving capacity. And the final products are high in purity and good in quality.
3. The production procedure is simple and the operational control is easy. The liquid with the moisture contents 40-60% (for special materials, the contents may reach 90%) can be dried into power or particle products once a time. After the drying, there is no need for smashing of sorting, so as to reduce the operation procedures in the production and enhance the purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management.

Sketch of Flow Chart

LPG High Speed Centrifugal Spray Drying Equipment for Producing Powder
III. Technical parameters of Spray dryer:
Type LPG
5 25 50 100 150 200-3000
Inlet temperature ≤ 350°C
Outlet temperature 80-90°C
Evaporate capacity (Kg/h) 5 25 50 100 150 200-3000
Driving type compressed air drive mechanical drive
Rotate speed 25000 22000 21500 18000 18000 15000
Diameter of Atomizer tray (mm) 50 120 120 120 150 180-340
Heating source electricity electricity electricity +steam+fuel oil+coal gas electricity +steam electricity +steam+fuel oil+coal gas To be solved by users
Electric-heating power (KW) 9 45 60 81 99  
Dried powder recovery rate (%) ≥ 95 ≥ 95 ≥ 95 ≥ 95 ≥ 95 ≥ 95




Installation size
A(mm) 1000 1290 1730 2500 2800 According to practical needs
B(mm) 2100 3410 4245 5300 6000
C(mm) 2300 4260 4645 6000 6700
φ D(mm) 1060 1800 2133 2560 2860
E1(mm) 1050 1200 1640 2100 2180
E2(mm) 1050 1200 1640 2100 2180
F(mm) 750 1000 1250 1750 1970
G(mm) 530 1700 1750 1930 2080
H(mm) 530 1300 1800 2600 3050
I(mm) 530 1550 1600 1780 1960
Note: All dimensions are for reference, they are depends on raw materials. Our factory has the right to change without prior notice.
 
Customers list of LPG High-Speed Centrifugal Spray Dryer
Name Model
LESAFFRE YEAST COOPERATION (American)   LPG-5
DKS AROMATICVIA GIAN LORENZO BERNINI (Italy)   LPG-5
HENRY S KOMAR&ASSOCIATES (Gauteng) LPG-100
GAPRIM SA  (TUNISIE)   LPG-150
Beijing trade company (Malaysia)    LPG-100(ф3000)
KOHJIN Life Sciences Co., Ltd (Japan)   LPG-3000 (ф8000)
Chemiworld (Pvt) Ltd (Pakistan)   LPG-120(ф4400)
Arnika-Holding, Ltd (Russia)   LPG-150 (ф3800)
SPTRU INVEST (TUNISIE)   LPG-150 ((ф3600)
Ceyshine Corporation (Pvt) Ltd  (Sri Lanka) LPG-25 ((ф2200)
Shandong Baodi LPG-1300(Ñ„7400)
Shanxi Baodi LPG-1200(Ñ„7200)
Tianjin Enbi   LPG-1600(ф8000)
Tongzhixing Food (Jiangsu) Co., Ltd  
(Tongyi Group)  
LPG-500(Ñ„5600)
LPG High Speed Centrifugal Spray Drying Equipment for Producing Powder
LPG High Speed Centrifugal Spray Drying Equipment for Producing Powder
LPG High Speed Centrifugal Spray Drying Equipment for Producing Powder
 

Auto Parts

Agricultural Machinery Parts Co., LTD. , http://www.chmachineparts.com